Motor drives
Explore brushless motor control, gate-drive and position-feedback components.
Component building blocks
Functional blocks for selection; device connections and component values depend on your design.
Brushless motor control
Use the brushless DC controller and its speed-feedback adapter to build a motor control loop. These control devices require an appropriate external power stage.
MOSFET gate drive
Drive external MOSFET gates from controller logic. Check gate charge, peak drive current, voltage and switching timing.
Rotor-position conversion
Convert resolver signals into digital position data for a control loop.
Current monitoring
Amplify the voltage across a current-sense resistor. Check input common-mode range, gain and error budget.
Electrical parameters & cross references
All handbook parameters for the components shown above. Scroll each table horizontally to view every column.
Motor Drivers
| BI Part Number | Cross Reference | Function | Motor type | Supply voltage (V) | Output current (A) | Core functions | Package |
|---|---|---|---|---|---|---|---|
| BIW33035PMC | MC33035 | Motor Drivers | Brushless DC | ~40V | 100mA(peak drive current) | Three- or four-phase brushless DC motor control; H-bridge drive, rotor-position decoder, temperature-compensated reference and Hall-sensor feedback. | SOP-24 |
| BIW33039PMC | MC33035 | Motor Drivers | Brushless DC | 5.5–9 | 20mA(control signal) | Closed-loop speed-control adapter providing speed feedback; used with a controller such as BIW33035PMC. | SOP-8 |
Non-isolated Gate Drivers
| BI Part Number | Cross Reference | Function | Channels | Supply voltage (V) | Peak output current (A) | Supply current (mA) | Driver type | Power switch | Voltage rating (V) | Output current (A) | Rise / fall time | Rise / fall propagation delay | Delay matching | Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| BID4426 | MIC4426 / MAX4426 | Dual-channel MOSFET driver | 2 | 4.5–18 | 1.5 | 8 | — | — | — | — | — | — | — | SOP8/TSSOP8 |
| BID4080PMC | HIP4080 | Non-isolated Gate Drivers | — | 8–15 | — | — | Full-bridge driver | MOSFET | 80 | 2.6A(source)/2.4A(sink) | 10ns/10ns | 70ns/50ns | 30ns(max) | SOP-20 |
Resolver-to-digital Converters
| BI Part Number | Cross Reference | Function | Supply voltage (V) | Interface | Resolution (bits) | Tracking rate (rps) | Package |
|---|---|---|---|---|---|---|---|
| BI2S1210 | AD2S1210 | Resolver-to-digital Converters | 5 | Parallel+SPI | 10/12/14/16 | 3125 | LQFP48 |
Current-sense Amplifiers
| BI Part Number | Cross Reference | Function | Supply voltage (V) | Input offset voltage (µV) | Input bias current (nA) | Supply current (mA) | Common-mode voltage (V) | Gain (V/V) | Package |
|---|---|---|---|---|---|---|---|---|---|
| BICM193 | INA193 | Current-sense amplifier | 18 | 500 | 210000 | 1 | 0–70 | 20 | SOT23-5 |
| BICM194 | INA194 | Current-sense amplifier with 50× gain | 18 | 500 | 210000 | 1 | 0–70 | 50 | SOT23-5/6 |
Selection based on documented BI component functions. Cross references are comparison aids and do not establish drop-in compatibility or transfer another manufacturer’s qualification.